2007 toyota prius

The two sides fit perfectly.

It only took me a minute to figure out that I’d need to install these together.

I installed both halves with the right screwdriver, and placed the 2-3 cm hole in each.

I did a simple screw into the hole, and when I plugged in the screws, it turned out to be pretty easy for me to plug them.

As you can see in the picture, the screw in the middle of the side of the lid was about 4 inch long and 1.5 inches wide compared to my usual diameter of 3.75. I’m using 3.75 for the front of the box, and 1.5 for the bottom.
https://cars45.co.tz/listing/toyota/prius/2007

I use 1.5cm in each of the 3 holes, then with my screwdriver, turn them around.
2007 toyota prius:

The two sides fit perfectly.

It only took me a minute to figure out that I’d need to install these together.

I installed both halves with the right screwdriver, and placed the 2-3 cm hole in each.

I did a simple screw into the hole, and when I plugged in the screws, it turned out to be pretty easy for me to plug them.

As you can see in the picture, the screw in the middle of the side of the lid was about 4 inch long and 1.5 inches wide compared to my usual diameter of 3.75. I’m using 3.75 for the front of the box, and 1.5 for the bottom.

Here are the pictures:

I use 1.5cm in each of the 3 holes, then with my screwdriver, turn them around.